Block: Power

Problem solved: Compiles all your power needs for a booking.

Description: The block “Power” is available under Content/Bookings in main menu on the left. The block opens from list view by clicking ”Edit” button. The block Power provides a space for users to collect all the power needs.

This block is the place to note both permanent (i.e. stages) or temporary (i.e. bookings) power needs. All power needs can then be compiled and collected by using reports.

Available fields:

Block: Power

Title – Name the power need.
Source – If different power sources are used, this lets user define what power source should be used. Note: Source can be changed in Setup.
Volts – The voltage needed for this power need.
Amps – The ampere needed for this power need.
Connector – Define what connector the power source needs.
UC – Designate if an RTU is required.
Position – Define the location that the power source should be (ex. Up Stage Left, Down Stage Right etc).
Start/Stop Date and Times – Designate when power must be available and when it can be disconnected.
Notes – Open notes section normally used to clarify any power specifications.
Location – If power is needed in other location than current, that can be changed here